SQ · Welded square hollow sections
Stainless Steel Square Tubes
Welded stainless steel square tubes in all sizes from 10×10 mm to 200×200 mm. Clean, consistent corner geometry and 180–600 grit surface options for structural and decorative use.




Specifications
Production details
- Size range
- 10×10 – 200×200 mm
- Wall thickness
- 0.5 – 8.0 mm (standard table)
- Welding method
- TIG and laser welding
- Heat treatment
- Fully automatic in-line bright annealing
- Tolerance
- ASTM A554 / order specification
- Tolerance detail
- Section, corner radius, straightness and twist: ASTM A554 and order specification
- Test
- Eddy current, during production
- Surface finish
- 180 · 240 · 320 · 400 · 500 · 600 grit — custom finishes on request
- Length range
- 1,500 – 24,000 mm
- Length tolerance
- −0 / +5 mm
- Material grades
- AISI 304 / 304L · 316 / 316L · 316Ti · 321 · 201 · 201J1 · 201J3 · 201J4 · 204 · Duplex 2205 (1.4462)
Production standards
- ASTM A554
Custom sizes, finishes and lengths are produced on request. Contact sales for non-standard requirements.
Sizes & weights
Stainless Steel Square Tubes weight table
Theoretical weights in kg/m by outside size and wall thickness. Type a size to filter the table.
| A × A (mm) | 1 | 1.2 | 1.5 | 2 | 2.5 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|---|---|
| 10 × 10 | 0.295 | 0.348 | 0.424 | – | – | – | – | – |
| 15 × 15 | 0.455 | 0.540 | 0.664 | 0.860 | – | – | – | – |
| 16 × 16 | 0.487 | 0.579 | 0.712 | 0.924 | – | – | – | – |
| 20 × 20 | 0.615 | 0.732 | 0.904 | 1.180 | – | – | – | – |
| 25 × 25 | 0.775 | 0.924 | 1.144 | 1.500 | 1.844 | 2.175 | – | – |
| 30 × 30 | 0.935 | 1.116 | 1.384 | 1.820 | 2.244 | 2.655 | – | – |
| 35 × 35 | 1.095 | 1.308 | 1.624 | 2.141 | 2.644 | 3.136 | – | – |
| 40 × 40 | 1.256 | 1.501 | 1.864 | 2.461 | 3.045 | 3.616 | 4.720 | – |
| 45 × 45 | 1.416 | 1.693 | 2.105 | 2.781 | 3.445 | 4.096 | 5.361 | – |
| 50 × 50 | – | 1.885 | 2.345 | 3.101 | 3.845 | 4.576 | 6.001 | 7.376 |
| 60 × 60 | – | – | 2.825 | 3.741 | 4.645 | 5.537 | 7.282 | 8.977 |
| 70 × 70 | – | – | 3.305 | 4.382 | 5.446 | 6.497 | 8.562 | 10.577 |
| 80 × 80 | – | – | 3.785 | 5.022 | 6.246 | 7.458 | 9.843 | 12.178 |
| 100 × 100 | – | – | 4.746 | 6.303 | 7.847 | 9.379 | 12.404 | 15.380 |
| 120 × 120 | – | – | – | 7.583 | 9.448 | 11.300 | 14.966 | 18.581 |
| 150 × 150 | – | – | – | 9.504 | 11.849 | 14.181 | 18.808 | 23.384 |
| 200 × 200 | – | – | – | 12.706 | 15.851 | 18.984 | 25.211 | 31.388 |
Source: ERKINOX weight tables. Values are theoretical weights in kg/m; “–” marks combinations not listed — request a quote for sizes outside the table.
Technical tool
Calculate your order weight
Enter size, wall thickness, length and pieces to see the total theoretical weight, then send it to the quote form.
- Unit weight
- 0,000 kg/m
- Total weight
- 0,00 kg
Source: ERKINOX weight table
Values are theoretical and may vary with grade and production tolerances.
Request a quote for this sizeApplications
Where it is used
- Steel structures and load-bearing details
- Façades, balustrades and architecture
- Furniture and interior design
- Automotive chassis and fittings
- Frames for food-processing equipment
Documents
Technical documents
- Product brochurePDF · 22 MB
- CertificatesISO 9001 · EN 10217-7 · EN 10296-2 · AD 2000-W0
- All technical tablesTube, square, rectangular, pressure
Contact sales to request a product-specific datasheet.
Related products
Other product families
Project · Stock · Custom production
Get a quote for stainless steel square tubes.
Share product type, grade, size, wall thickness, length and quantity — our sales team will respond to your standard or custom-size request.


