Technical Center · Tool
Size gauge 1:1
Calibrate your screen once with a card and see tube and profile sections at their true size. Hold the end of a tube against the screen and identify its diameter with DN and inch equivalents.
- 1Calibrate the screen with a card
- 2Choose a size
- 3Hold the tube against the screen
1Screen calibrationCalibratedCalibrate first
Hold a standard-size card (85.60 × 53.98 mm, like a bank or ID card) against the frame on screen. Use the slider until the frame matches the edges of the card exactly.
With a ruler: adjust the slider until the line measures exactly 100 mm.
2Size
Place the tube end on the circle; enlarge or shrink the circle until the outside edge matches exactly.
Nearest standard diameters
Print at 100 % scale (“fit to page” off). The control line must measure exactly 100 mm on paper.
3Hold the tube against the screen
This size does not fit on the screen, so the arc is shown. Hold the outside edge of the tube against the arc or use a caliper.
What you see depends on the calibration; use a caliper and micrometer for exact measurement and acceptance. The profile corner radius is representative. Dimensional tolerances follow the product standard.
Project · Stock · Custom production
Let’s specify the exact size you need.
Share product type, grade, size, wall thickness, length and quantity — our sales team will respond to your standard or custom-size request.