Quality

Quality at every stage of production

We believe sustainable quality comes from care at every stage of production. Tests run in-line; our systems are certified by independent bodies.

Quality control

In-line testing, measurable tolerances

The tests used in stainless tube and profile production are performed in our plant during manufacturing.

Eddy-current testing

In-line detection of weld-seam discontinuities during production.

Hydrostatic testing

Tubes are pressure-tested in the plant during production.

Dimensional tolerance

ISO 1127 D4/T3: diameter ±0.5% (min. ±0.1 mm), wall ±10% (min. ±0.2 mm); length −0/+5 mm.

Heat treatment

In-line annealing in a fully automatic bright-annealing unit.

Test category

Test category TC1 under EN 10217-7.

Traceability

Bundle labels carry batch no., grade, size, standard and production date.

Standards

Our production standards

  • EN 10217-7
  • EN 10296-2
  • ASTM A312
  • ASTM A554
  • EN 10357
Standards & grades guide

Traceability

How to read the bundle label

The label on every ERKINOX bundle shows batch, grade, size, quantity and standard at a glance. Quote the batch number for any enquiry.

ERKINOX bundle label close-up
A real ERKINOX bundle label
  1. 01
    Batch No B8-23

    Production batch; quote this number for traceability and enquiries.

  2. 02
    Grade 304

    Material grade (AISI).

  3. 03
    Surface BRIGHT

    Surface finish.

  4. 04
    Length 6000

    Length of one piece, mm.

  5. 05
    Pcs 91

    Pieces in the bundle.

  6. 06
    Meter 546

    Total metres in the bundle (length × pieces).

  7. 07
    Weight 532

    Bundle weight, kg.

  8. 08
    Standard EN 10217-7

    Production standard.

  9. 09
    Prod. date 19-08-2026

    Day of production.

  10. 10
    Not —

    Order-specific remarks.

Certificates

Certified systems, measurable product.

Quality, environmental, occupational health and safety, energy and information security management systems; EN 10217-7, EN 10296-2, ASTM A312 and EN 10357 product certificates, and material manufacturer approval under the Pressure Equipment Directive.

01Management systems

02Product and pressure equipment

  • Product certificateEN 10217-7Manufacturer conformity certificateTÜV NORDRequest a copy
  • Product certificateEN 10296-2Manufacturer conformity certificateTÜV NORDRequest a copy
  • Product certificateAD 2000-W0 · 2014/68/EUMaterial manufacturer quality assurance system (PED)TÜV NORDRequest a copy
  • Product certificateASTM A312Manufacturer conformity certificateTÜV NORDRequest a copy
  • Product certificateEN 10357Manufacturer conformity certificateTÜV NORDRequest a copy

03Declarations of conformity

  • Certificate of conformityCECertificate of conformityTEST-UVRequest a copy
  • Certificate of conformityCEAttestation of conformityGCR CERTRequest a copy
  • Certificate of conformityREACHDeclaration of conformityManufacturer’s declarationRequest a copy
  • Certificate of conformityRoHSTechnical file declarationManufacturer’s declarationRequest a copy
State the document type in the order.

The inspection document requested with the product, EN 10204 3.1 or 3.2, is defined in the order. For a 3.2 certificate, the independent inspection body and the test scope must be clarified before production planning. Product data sheets, material certificates and test reports can be requested from our sales team. Current copies, scopes and validity dates of the documents are confirmed before ordering.

Project · Stock · Custom production

Need a certificate or test report?

Write to our sales team for order-specific documents, certificates or technical information.